XBLink-WebApp

With XBLink Plus, All configs will be done via WebApp.

Web interface to easily configure and communicate with XBLink.

When you buy XBLink Plus, It is ready to use. Nothing to do. This section is useful when you want to upgrade new firmware, check device or re-login new account .

Connect XBLink to WebApp

We support 3 method to connect to WebApp as below:

  1. Connect via Hotspot

  2. Connect via LAN network

  3. Connect directly to PC

Hotspot

You can easily connect WedApp via Wifi hotspot from your phone, table or PC.

  1. Turn on XBlink.

  2. Connect your PC/Phone to XBLink Wifi Hotspot

Name: XBLINK_your_account
Pass: xbstation.com
PC, Tablet, Phone

  1. Open web browser on PC/Phone and go to this address http://10.0.0.1 or http://xblink.local

http://10.0.0.1 or http://xblink.local

LAN network

  1. Connect JST-GH to RJ45 Ethernet Adapter cable by Ethernet Cable (only supported Cat6) to your LAN network. Then, plug it into ETH port of XBLink.

  2. Turn on XBLink.

Connect to LAN network

  1. Open web browser on PC/Phone and go to this address http://xblink.local or XBLink IP (Example: 192.168.1.24)

http://xblink.local

If you can't connect by http://xblink.local

please use Advanced IP Scanner to find XBLink IP: here

Example for Check IP

Connect directly to PC

  1. Connect JST-GH to RJ45 Ethernet Adapter cable by Ethernet Cable (only supported Cat6) to your table or PC. Then, plug it into ETH port of XBLink.

  2. Turn on XBLink.

Connect directly to PC

  1. Open web browser on PC/Phone and go to this address http://xblink.local

http://xblink.local

Let's discover the variety of feature's WebApp!

PreviousDimensions and CAD ModelNextDevice

Last updated

Was this helpful?