XBLink-WebApp

With XBLink 5G R2, All configs will be done via WebApp.

Web interface to easily configure and communicate with XBLink.

When you buy XBLink 5G R2, It is ready to use. Nothing to do. This section is useful when you want to upgrade new firmware, check device or re-login new account .

Connect XBLink to WebApp

We support 2 methods to connect to WebApp as below:

1. Connect via Hotspot

2. Connect via LAN network

---

Hotspot

You can easily connect WedApp via Wifi hotspot from your phone, table or PC.

1. Turn on XBlink.

2. Connect your PC/Phone to XBLink Wifi Hotspot

Name: XBLINK_your_account
Pass: xbstation.com

PC, Tablet, Phone

1. Open web browser on PC/Phone and go to this address http://10.0.0.1 or http://xblink.local

http://10.0.0.1 or http://xblink.local

LAN network

1. Connect JST-GH to RJ45 Ethernet Adapter cable by Ethernet Cable (only supported Cat6) to your LAN network. Then, plug it into ETH port of XBLink.

2. Turn on XBLink.

Connect to LAN network

1. Open web browser on PC/Phone and go to this address XBLink IP (Example: 192.168.1.24)

http://xblink.local

If you can't connect by XBLink IP please login to your router's Dashboard

or Advanced IP Scanner to find XBLink IP: here

Example for Check IP

Let's discover the variety of feature's WebApp!