LED indicator
This article will describe the led indicator of XBLink Plus
Last updated
This article will describe the led indicator of XBLink Plus
Last updated
LED | Color | Description |
Main led | RGB | Indicates the status of XBLink Plus |
SYS led | Green | System led |
LTE led | Orange | Status of the cellular connection |
Cam led | Orange | Turn on when take a picture |
Power led | Red | Inside XBLink Plus |
| Color | Fast Blink(0.15s) | Slow Blink(1.5s) | Blink(0.7s) | Solid |
|---|---|---|---|---|
Blue | Network Scanning | Network Scanning | Network Scanning | App Starting |
Red | Check SIM and APN (Error 1) | Datacap OK, Internet connected | Check SIM (Error 2) | Insert SIM (Error 3) |
Yellow (2G) |
|
|
| All good- Connected to pilot app |
Pink (3G) |
|
|
| All good- Connected to pilot app |
Green (4G) |
|
|
| All good- Connected to pilot app |
Error 1: Fast Red Blink (0.15s) - Please check SIM card status, APN configuration and the current network environment.
Error 2: Red Blink (0.7s) - Please check your hardware connection (SIM card status, antenna)
Error 3: Red Solid Blink - Please insert SIM card.
If the main LED blinks both a blue and other colors as shown below.
Wait another 10-15s for XBLink Plus to try to connect the internet in your area.
Then, please check your internet connection and the current network environment.
| Blink (0.7s) | Yellow (2G) | Pink (3G) | Green (4G) | Cobalt (5G) |
|---|---|---|---|---|
Blue | Connecting 2G No Internet | Connecting 3G No Internet | Connecting 4G No Internet | Connecting 5G No Internet |
In order to verify the particular status of XBLink, we highly recommend that you should visit XBLink-WebApp
Blinks - Normal operation
Solid - Firmware Upload
When the connection is established and data is being transmitted/received, this led will blink at special intervals. Otherwise, if there is no connection, the led will remain off.
Light - Power is OK
Off - No power input
