Connect to XBFirm

With XBStation_V3, All configs will be done via webgui and XBFirm hospot Wifi

Note: you can still access and configure Raspberry Pi via SSH (both XBFirm hospot Wifi and enthernet cable)

  • Username: pi
  • Password: raspberry

Connect XBFirm hotspot Wifi

  • After Flash SD, turn on Raspberry.
  • Connect your PC to Raspberry via Wifi Hotspot

Name: XBFirm Hotspot Pass: 123123123

XBStation Wifi Hotspot

WebGUI

Config via web interface

Note: If you connect with Raspberry via Ethernet Cable, you can find Raspberry IP with Advanced IP Scanner

Scan IP

Network Configure

With XBStation_V3, we have 2 option for provide internet on Raspberry when you test and fly. - Option 1: XBStation 4G module (you need configure APN- instruction below) - Option 2: Ethernet, Dongle ( E3372 or others) Note: Please choose the correct option, this is very important

Choose your option and Save Changes Choose network configuration

Make sure success

Choose network configuration

After success, you need reset Raspberry for effect

Login

Input XBStation Account: - Username - Password Note: Please don’t change IP Server

Click LOGIN Login XBFirm at Companion computer

Make sure success

Login at Companion computer

After success, you need reset Raspberry for effect

APN

  • Plug enthernet cable into Raspberry for config APN
  • Fill in the network's APN name (Ex: I use Viettel network and APN name: v-internet) Note: You need find APN name for suitable with your network carrier (AT&T,T-Mobile) and SIM

Setup APN

Make sure success

Login at Companion Computer

After success, you need reset Raspberry for effect