LED indicator
This article will describe the led indicator of XBLink SAT NDAA
Led Map
LED
Color
Description
Main led
RGB
Indicates the status of XBLink SAT NDAA
SYS led
Green
System led
LTE led
Orange
Status of the cellular connection
Cam led
Orange
Turn on when take a picture
Power led
Red
Inside XBLink SAT NDAA
1.Main LED
Blue
Network Scanning
Network Scanning
Network Scanning
App Starting
Red
XBLink SAT NDAA not receiving signal from satellite device. (Error 1)
Datacap OK,
Internet connected
XBLink SAT NDAA not receiving signal from satellite device. (Error 1)
XBLink SAT NDAA not connect with satellite device. (Error 2)
Green
App running
Cloud connecting
XBFirm running
Internet connected
Cloud connecting
No sign in Pilot App
XBFirm running
Pilot App connecting
Cloud connected
Signed in Pilot App
All good -
Connected to Pilot App
Error 1: Blinking Red - Please check the connection of XBLink SAT NDAA and Satellite device (Ethernet cable, Coupler, Power, etc. ).
Error 2: Solid Red - Please connect the XBLink SAT NDAA with Satellite device.
If the main LED blinks both a blue and other colors as shown below.
Wait another 15-30s for Satellite device try to connect the satellite internet in your area.
If after this period the internet connection is still not available, check whether the satellite device has a clear view of the sky (not blocked by a roof, trees, etc.). If it is clear and the issue persists, restart either the xblink or the satellite device.
2.SYS LED
Blinks - Normal operation
Solid - Firmware Upload
3. LTE LED
When the connection is established and data is being transmitted/received, this led will blink at special intervals. Otherwise, if there is no connection, the led will remain off.
4.Power LED
Light - Power is OK
Off - No power input
Last updated