Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Flash Image

This section contains the firmware uploading of XBLink

Overview

There are 2 methods to update new firmware for XBLink:

  1. Flash Firmware via hardware: new device, need to login after flash

  2. Upgrade Firmware via software: update software, no need login after update

Method 1: Download Firmware

XBLink Firmware (XBFirm): Contact us

Release Note

Tool: Link

Hardware Preparation

Requirements

  • XBLink Duo

  • Host PC (Windows)

  • Micro USB cable

  • Power supply for XBLink Duo

  • System Image provided by XB

Flash Firmware:

This section will guide you how to flash new firmware of XBLink:

  1. Turn on "Boot"

2. Plug battery to power On XBLink, sys led will be solid

3. Turn on boot software on your PC, connect USB port to your PC by Micro USB cable

4. Format SD Card

Format before write new img

5. Flash new firmware with Win32DiskImager

Choose the img (contact XB to get img)

Then click “Write”

Wait until the process reaches 100%.

After turning off the boot switch and power cycling the XBLink, please follow these steps to re-establish the connection:

  1. Connect to the XBLink's WiFi hotspot.

  2. Access the configuration webpage and navigate to the Authentication tab on the left menu.

  3. Click Logout, and then Log back in.

Method 2: Upgrade Firmware

Upgrade firmware via Wi-Fi hostpot

Last updated