Config Network

This article shows you how to check and configure network settings for your Dual Cellular modules (SIM 1 and SIM 2).

After connecting successfully to WebApp, navigate to Network tab.

APN Setting

You can configure the APN for each SIM slot independently. We have 2 ways to configure the APN: Auto and Manual. XBLink supports Automatic APN detection (Default).

Auto

When you insert a SIM card into Slot 1 or Slot 2, its APN configuration is set to Auto mode by default. This meaning is XBLink use information of your SIM such as Cache MCC and Cache MNC to search and choose a proper APN.

You must Stop Cellular Modem and Start Cellular Modem (for the respective SIM 1 or SIM 2) to have valid command.

Manual

You also can choose Manual mode up to your country and network provider for each SIM.

You must Stop Cellular Modem and Start Cellular Modem (for the respective SIM 1 or SIM 2) to have valid command.

In case you cannot find a suitable network operator in the list, please select Other for both the Country and Operator sections, then manually type in your APN details.

You must Stop Cellular Modem and Start Cellular Modem (for the respective SIM 1 or SIM 2) to have valid command.