Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Firmware

This section contains the firmware uploading of XBLink

Overview

There are 2 methods to update new firmware for XBLink:

  1. Flash Firmware via hardware: new device, need to login after flash

  2. Upgarde Firmware via software: update software, not need login after update

Method 1: Dowload Firmware

XBLink Firmware (XBFirm): Contact us

Release Note

Tool: Link

Hardware Preparation

Requirements

  • XBlink 5G

  • Host PC (Windows)

  • Micro USB cable

  • Power supply for XBlink 5G

  • System Image provided by XB

Flash Firmware:

This section will guide you how to flash new firmware of XBLink:

  1. Turn on "Boot"

2. Connect UPGR USB port to your PC by USB cable

3. Turn on boot software on your PC, before Power On

4. Power On XBLink ( plug battery), sys led will be solid

5. Format SD Card

Format before write new img

6. Flash new firmware with Win32DiskImgare

Choose the img (contact XB to get img)

Then click “Write”

Wait until the process reaches 100%.

After turning off the boot switch and power cycling the XBLink, please follow these steps to re-establish the connection:

  1. Connect to the XBLink's WiFi hotspot.

  2. Access the configuration webpage and navigate to the Authentication tab on the left menu.

  3. Click Logout, and then Log back in.

Method 2: Upgarde Firmware

Upgarde firmware via wifi hostpost

Last updated