Setup
This section contains the hardware connection of XBLink 5G.
Link 5G hardware connection mainly includes SIM, Antenna, XBCamera Mini, Flight Controller and Power up.
Nano SIM Card
XBLink 5G supports push-push NanoSim connector.
Insert your SIM card into the SIM Card slot, the chip contacts have to face up.
To remove the SIM card, push onto the card with a tool. You can hear a "click" and the card will be pushed out of the enclosure. To remove the card again, push it in once more and it will pop out.


Antenna
Connect the four LTE antennas to the MMCX connectors.

XBCam V2
Connect XBCam V2 to USB type C port.

Connect Flight Controller (Telemetry)
You can use Telemetry 1 or 2 of Pixhawk for connection with XBLink 5G via COM1/2 (optional) or COM3 port.


Power up
XBLink 5G supports 7-30V voltage input. We highly recommend 3-4 S battery or 12V DC UBEC (minimum 3A) to power (6S battery is possible but make sure it's high quality and low discharge)

Done

Once XBLink 5G has green color continue to the next step to connect it to XBStationPillotApp.
More information: here
Last updated